Equinox AWD V6-3.4L VIN F (2006)
3. Install the RH air outlet duct screws to the instrument panel retainer.
Tighten the screws to 1 N.m (9 lb in).
4. Install the RH I/P trim panel.
Air Outlet Duct - Center
AIR OUTLET DUCT REPLACEMENT - CENTER
REMOVAL PROCEDURE
1. Remove the instrument panel retainer.
2. Remove the center air outlet duct push pins from the cross car beam.
3. Remove the center air outlet duct from the cross car beam.
INSTALLATION PROCEDURE
1. Inspect the seals, and replace if damaged, using Kent Industries adhesive backed foam tape P/N 46485 or equivalent.
