Equinox AWD V6-3.4L VIN F (2006)
1. Add the specified amount of PAG oil to the condenser. Refer to Refrigerant System Capacities.
2. Inspect the radiator to condenser seals for the proper position.
3. Install the condenser to the lower retention clips on the radiator.
4. Install the bolts to retain the top of the condenser to the radiator.
Tighten the bolts to 9 N.m (80 lb in).
NOTE: Refer to Fastener Notice.
5. Install the CRFM brackets to the vehicle.
6. Install the CRFM bracket bolts to the radiator support.
Tighten the bolts to 10 N.m (89 lb in).