Equinox AWD V6-3.4L VIN F (2006)
1. Connect the electrical connectors on the stop lamp switch.
NOTE: Proper stoplamp switch adjustment is essential. Improper stoplamp switch adjustment may cause brake drag, heat buildup and excessive
brake lining wear.
IMPORTANT:
-
Do NOT depress the brake pedal assembly during the stop lamp switch installation. This will cause a drag condition on the brake.
-
Inspect the retainer to insure that the locking tabs have locked into position and the retainer is in place.
2. Install the switch to the bracket by turning and pushing the switch until the switch bottoms on the brake pedal.
3. Inspect the stop lamps for proper operation
