Equinox AWD V6-3.4L VIN F (2006)
License Plate Bulb: Service and Repair
LICENSE LAMP BULB REPLACEMENT
REMOVAL PROCEDURE
1. Remove the screws (2) attaching the rear license plate lamp assembly to the rear license plate lamp bezel.
2. Lower the license plate lamp assembly (1) from the bezel.
3. Rotate the license plate lamp bulb assembly counterclockwise and remove it from the housing.
4. Pull the license plate lamp bulb out of the bulb socket.
INSTALLATION PROCEDURE
1. Press the license plate lamp bulb into the lamp socket until seated.
2. Install the license plate lamp bulb socket assembly (1) in the license plate lamp lens and rotate clockwise until seated.
3. Align license plate lamp assembly with the license plate lamp bezel.
