Equinox AWD V6-3.4L VIN F (2006)
Brake Light Switch: Adjustments
STOP LAMP SWITCH ADJUSTMENT
ADJUSTMENT PROCEDURE
1. Improper stoplamp switch adjustment may cause brake drag, heat buildup and excessive brake lining wear.
NOTE: Proper stoplamp switch adjustment is essential.
Disconnect the electrical connector from the stop lamp switch.
2. Rotate the switch counterclockwise and remove the switch from the switch retainer.
3. Install the switch to the bracket by turning and pushing the switch until the switch bottoms on the brake pedal.
IMPORTANT: Do NOT depress the brake pedal assembly during the stop lamp switch installation.
