Equinox AWD V6-3.4L VIN F (2006)
15. Remove the CPA from the seat belt pretensioner - RF connector.
16. Disconnect the seat belt pretensioner - RF connector from the vehicle harness connector.
17. Remove the CPA (2) from the SIS - RF connector.
18. Disconnect the SIS - RF (1) from the vehicle harness connector (3).
ENABLING PROCEDURE
1. Remove the key from the ignition switch.
2. To enable the roof rail module - right, continue to step 3. To enable both the side impact sensor (SIS) - RF and the seat belt pretensioner - RF,
continue to step 9.
