Equinox AWD V6-3.4L VIN F (2006)
20. Remove the lower center pillar trim.
21. Remove the CPA from the seat belt pretensioner - LF connector.
22. Disconnect the seat belt pretensioner - LF connector from the vehicle harness connector.
23. Gently pull down the left rear corner of the headliner to access the roof rail module - left connector.
24. Remove the CPA from the roof rail module - left connector.
25. Disconnect the roof rail module - left connector from the vehicle harness connector.
ENABLING PROCEDURE
1. Remove the key from the ignition switch.
