Equinox AWD V6-3.4L VIN F (2006)
Tie Rod End: Service and Repair
Rack and Pinion Outer Tie Rod End Replacement
^
Tools Required
-
J 24319-B Steering Linkage and Tie Rod Puller
Removal Procedure
1. Raise and support the vehicle.
2. Remove the front tire assembly.
3. Important: Mark the location of the jam nut for installation.
Loosen the tie rod inner jam nut.
4. Important: Hold the ball stud to prevent turning during removal of the nut.
Remove the tie rod to knuckle nut. Discard the nut.
