Equinox AWD V6-3.4L VIN F (2006)
Stabilizer Link: Service and Repair
Front Suspension
Stabilizer Shaft Link Replacement
Removal Procedure
1. Raise and support the vehicle.
2. Remove the tire and wheel.
3. Important: Do not allow the stabilizer link ball stud to rotate while removing the link nut.
Remove the stabilizer link to strut nut.
4. Important: Do not allow the stabilizer link ball stud to rotate while removing the link nut.
Remove the stabilizer link to stabilizer bar nut.
5. Remove the stabilizer link.
Installation Procedure
