Equinox AWD V6-3.4L VIN F (2006)
4. Notice: Do not submerge the clutch drum in solvent. This will damage friction material and geroter pump.
Install the clutch drum (1) to the pinion shaft (2) by shaking the drum while rotating the drum back and forth to engage the splines of the pump
rotor and bushing.
5. When properly engaged, the clutch drum will be fully seated against the clutch drum oil seal (1).
6. Apply a continuous bead of sealer, GM P/N 21019581 (Canadian P/N 10953472) of equal height and width to the RDM housing sealing surface.
Apply sealer to a height and width of 2.5 mm (0.098 inch).
