Equinox AWD V6-3.4L VIN F (2006)
13. Align the reference marks on the propeller shaft and the RDM pinion flange.
14. Thoroughly clean and apply threadlocker, GM P/N 89021297 (Canadian P/N 10953488), to the propeller shaft flange mounting bolt threads.
15. Install the bolts to the propeller shaft and the pinion flange.
^
Tighten the bolts to 50 Nm (37 ft. lbs.).
16. Remove the support stands.
17. Install the propeller shaft guard to the RDM.
18. Install the bolts to the propeller shaft guard.
^
Tighten the bolts to 25 Nm (18 ft. lbs.).
19. Inspect the RDM fluid level.
20. Lower the vehicle.
