Equinox FWD V6-3.0L (2010)
6. Remove the 2 master cylinder nuts (1).
7. Remove the master cylinder (2).
8. If installing a new master cylinder, remove the master cylinder reservoir and cap. Refer to Master Cylinder Reservoir Replacement (See: Brake
Fluid Reservoir/Service and Repair).
9. If removing the master cylinder reservoir, discard the reservoir retaining pins and seals.
Installation Procedure
1. If the master cylinder reservoir was removed, install new master cylinder reservoir seals.
2. If installing a new master cylinder, install the master cylinder reservoir and cap using new reservoir retaining pins. Refer to Master Cylinder
Reservoir Replacement (See: Brake Fluid Reservoir/Service and Repair).
3. If installing a new master cylinder, bench bleed the master cylinder. Refer to Master Cylinder Bench Bleeding (See: Procedures/Master Cylinder
Bench Bleeding).
4. Install the master cylinder (2).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).