Equinox FWD V6-3.0L (2010)
5. Route the front park brake cable through the vehicle floor and seat the pass through grommet.
6. Position the park brake cable routing clip to the floor stud.
7. Position the driver floor carpet to the vehicle floor.
8. Connect the park brake warning indicator switch electrical connector.
9. Install the left side body hinge pillar trim panel. Refer to Body Hinge Pillar Trim Panel Replacement (See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair/Body Hinge Pillar Trim Panel Replacement).