Equinox FWD V6-3.0L (2010)
3. Install the power brake booster auxiliary pump to the pump bracket.
4. Install the power brake booster auxiliary pump nuts (1) and tighten to 9 Nm (80 lb in)
5. Connect the power brake booster vacuum hose quick connect (3).
6. Connect the power brake booster auxiliary pump electrical connector.
7. Secure the power brake booster auxiliary pump electrical connector retainer to the pump bracket.
8. Secure the power brake booster vacuum hose from the routing clip (2) on the power brake booster auxiliary pump.
9. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Intake
Manifold/Service and Repair/Intake Manifold Cover Replacement).