Equinox FWD V6-3.0L (2010)
Water Pump: Service and Repair
Water Pump Replacement (LF1)
Tools Required
EN 46104 - Water Pump Pulley Holder
For equivalent regional tools refer to Special Tools (See: Tools and Equipment)
Removal Procedure
1. Drain the cooling system. Refer to Cooling System Draining and Filling (Static) (See: Service and Repair/Cooling System Draining and Filling
(Static))Cooling System Draining and Filling (GE 47716) (See: Service and Repair/Cooling System Draining and Filling (GE 47716))
2. Remove the generator drive belt. Refer to Drive Belt Replacement (See: Engine/Drive Belts, Mounts, Brackets and Accessories/Drive
Belt/Service and Repair)
3. Use the EN 46104 - water pump pulley holder to retain the pulley.