Equinox FWD V6-3.0L (2010)
5. Use the EN 46104 - water pump pulley holder to hold the pulley.
6. Install the water pump pulley bolts and tighten to 12 Nm (108 lb in).
7. Install the generator drive belt. Refer to Drive Belt Replacement (See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and
Repair)
8. Fill the cooling system. Refer to Cooling System Draining and Filling (Static) (See: Cooling System/Service and Repair/Cooling System Draining
and Filling (Static))Cooling System Draining and Filling (GE 47716) (See: Cooling System/Service and Repair/Cooling System Draining and
Filling (GE 47716))