Equinox FWD V6-3.0L (2010)
16. Install the liquid line to the strut tower.
17. Install the liquid line nut to the strut tower and tighten to 9 Nm (80 lb in).
18. Connect the harness and vent hose retainers to the liquid line.
19. Install the surge tank. Refer to Radiator Surge Tank Replacement (See: Engine, Cooling and Exhaust/Cooling System/Coolant Reservoir/Service
and Repair/Radiator Surge Tank Replacement).
20. Install the washer bottle. Refer to Windshield Washer Solvent Container Replacement (Equinox) (See: Wiper and Washer Systems/Windshield
Washer Reservoir/Service and Repair) Windshield Washer Solvent Container Replacement (Terrain) (See: Wiper and Washer
Systems/Windshield Washer Reservoir/Service and Repair).
21. Install the left headlamp. Refer to Headlamp Replacement (Equinox) (See: Lighting and Horns/Headlamp/Service and Repair) Headlamp
Replacement (Terrain) (See: Lighting and Horns/Headlamp/Service and Repair).
22. Recharge the A/C system. Refer to Refrigerant Recovery and Recharging (See: Heating and Air Conditioning/Service and
Repair/Procedures/Refrigerant Recovery and Recharging).
23. Test the affected A/C joints for leaks using J 39400-A - Halogen Leak Detector.
