Equinox FWD V6-3.0L (2010)
5. Insert the J 38125-11A into the terminal release tang access slot located behind the access panel of the connector and press down on the terminal
while carefully pulling the terminal out of the connector. Always remember never use force when pulling a terminal out of a connector. If the
terminal is difficult to remove, repeat the entire procedure.
Terminal Repair Procedure
Use the appropriate terminal and follow the instructions in the J-38125.
Tyco/AMP Connectors (0.25 Cap)
Tyco/AMP Connectors (0.25 Cap)
Special Tools
J-38125 Terminal Repair Kit
Terminal Removal Procedure
1. Disconnect the connector from the component by pressing down on the connector position assurance (CPA).
