Equinox FWD V6-3.0L (2010)
Negative: Service and Repair
Battery Negative Cable Replacement
Battery Negative Cable Replacement (LF1)
Removal Procedure
1. Record all of the radio station presets.
2. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (See: Battery Negative Cable
Disconnection and Connection).
3. Disconnect the battery current sensor from the body harness (1)
4. Remove the battery negative cable ground nut (2) from the frame rail.
5. Remove the battery negative cable engine ground bolt (1) from the engine block.
6. Remove the battery negative cable (2).