Equinox FWD V6-3.0L (2010)
Note: Observe how the battery negative cable was routed within the engine compartment.
Installation Procedure
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Install the battery negative cable engine ground nut (1) to the engine and tighten to 25 Nm (18 lb ft).
2. Install the battery negative cable frame ground nut (1)to the frame rail and tighten to 25 Nm (18 lb ft).
3. Install battery negative cable clamp to the battery post.Refer to Battery Negative Cable Disconnection and Connection (See: Battery Negative
Cable Disconnection and Connection)
4. Reset the radio channel presets.