Equinox FWD V6-3.0L (2010)
Positive: Service and Repair
Battery Positive Cable Replacement (LF1)
Removal Procedure
1. Record all of the radio station presets.
2. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (See: Negative/Service and Repair/Battery
Negative Cable Disconnection and Connection).
3. Remove the ECM mounting bracket.
4. Remove the battery positive post clamp nut (2).
5. Remove the battery retainer bracket and the battery.Refer to Battery Replacement (See: Service and Repair/Removal and Replacement/Battery
Replacement).
6. Remove battery positive terminal (1) at the fuse block.
7. Disconnect retainers (3) holding battery positive cable (4).