Equinox FWD V6-3.0L (2010)
1. Loosen the upper control arm-to-frame fastener enough to allow movement.
Note: The frame of the vehicle is slotted, turning the cam nut will move the camber in to the designated location.
2. Rotate the upper control arm-to-frame fastener in the direction necessary to the correct the camber measurement.
3. Snug the upper control arm-to-frame fastener, do not tighten at this time.
4. Reinspect the rear camber specifications and adjust as necessary.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
5. Hold the nut and tighten the upper control arm-to-frame bolt to 164 Nm (121 lb ft).
6. Repeat the procedure for the other rear wheel.
Rear Toe Adjustment
Rear Toe Adjustment
1. Loosen the suspension adjustment link-to-frame fastener enough to allow for movement.
