Equinox FWD V6-3.0L (2010)
Power Steering Line/Hose: Service and Repair
Power Steering Fluid Cooling Pipe Replacement
Power Steering Fluid Cooling Pipe Replacement
Removal Procedure
1. Place drain pans under the vehicle.
2. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Intake
Manifold/Service and Repair/Intake Manifold Cover Replacement).
3. Remove as much power steering fluid from the upper power steering fluid reservoir as possible.
4. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement (Equinox) (See: Body and Frame/Bumper/Front Bumper/Front
Bumper Cover / Fascia/Service and Repair/Front Bumper Fascia Replacement)Front Bumper Fascia Replacement (Terrain) (See: Body and
Frame/Bumper/Front Bumper/Front Bumper Cover / Fascia/Service and Repair/Front Bumper Fascia Replacement).
5. Disconnect the power steering fluid cooling pipe (1) from the power steering gear (2).