Equinox FWD V6-3.0L (2010)
1. Install the 3 input speed sensor seals (1).
2. Install the input speed sensor (3).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the input speed sensor bolt (2) M6 x 23 and tighten to 12 Nm (106 lb in).
4. Connect the input speed sensor electrical connector (1).
5. Install the transmission control valve body cover. Refer to Control Valve Body Cover Replacement (See: Valve Body/Service and
Repair/6T30/6T40/6T45 - Automatic Transmission/Control Valve Body Cover Replacement).
6. Perform the transmission adaptive values learn procedure. Refer to Transmission Adaptive Values Learn (See: Testing and
Inspection/Programming and Relearning/6T30/6T40/6T45 - Automatic Transmission).
