Equinox FWD V6-3.0L (2010)
Constant Velocity Joint: Service and Repair
Front Wheel Drive Shaft Outer Joint and Boot Replacement
Front Wheel Drive Shaft Outer Joint and Boot Replacement
Special Tools
*
CH 48894 - Wheel Drive Shaft Boot Clamp Pliers
*
J 35910 - Drive Axle Seal Clamp Pliers
Note: The outer Constant Velocity Joint is not service separately. If the CV joint is found to have excessive wear or damage, replace the wheel drive
shaft as an assembly.
Disassemble Procedure
1. Remove the wheel drive shaft from the vehicle. Refer to Front Wheel Drive Shaft Replacement (See: Service and Repair)
2. Clamp the drive axle shaft in a soft jawed vice.