Equinox FWD V6-3.4L (2007)
3. Coat the rocker arm friction surfaces using prelube GM P/N 1052367 (Canadian P/N 992869) or the equivalent.
Important: Shims may be required under the valve rocker arm pedestals if reconditioning has been performed on the cylinder head or its
components.
4. Install the valve rocker arms in their original positions.
Notice: Refer to Fastener Notice .
5. Install the valve rocker arm bolts.
Tighten the bolts to 42 N.m (31 lb ft).
6. Install the valve rocker arm cover(s).