Equinox FWD V6-3.4L (2007)
Engine Mount: Service and Repair
Engine Support Fixture
Engine Support Fixture
Installation Procedure
Tools Required
*
J 28467-B Universal Engine Support Fixture
*
J 36462-A Engine Support Adapter Leg Set
*
J-28467-13 Engine Support Fixture Adapters
*
GM P/N 11519137 4 Studs or equivalent
1. Remove the fuel injector sight shield.
2. Pull each end of the hood rear seal away from the cowl panel flange near both strut towers.
Notice: Refer to Fastener Notice .
3. Replace 2 strut bolts with studs GM P/N 11519137 on right and left sides of the vehicle for installation of support fixture.
Tighten the studs to 25 N.m (18 lb ft).
