Equinox FWD V6-3.4L (2007)
4. Install the J-28467-13 (1) and J 28467-5 strut tower adapter (2) to the top of the right strut tower.
5. Install the J-28467-13 (2) and J 28467-5 strut tower adapter (1) to the top of the left strut tower.
6. Install a 127 cm (50 in) engine support fixture cross bar (2) transversely across the vehicle between both J 28467-5 strut tower adapters.
7. Insert safety pins (1, 3) through the J 28467-5 strut tower adapters and the cross bar (2) to prevent movement.
Important: If 58 cm (23 in) length engine support cross bar is not available it may be necessary to remove the vehicle hood for additional
clearance if a longer cross bar is to be substituted.
