Equinox FWD V6-3.4L (2007)
Oil Pan: Service and Repair
Oil Pan Replacement
Tools Required
J 39505 Torque Wrench Adapter
Removal Procedure
1. Disconnect the battery negative cable
2. Install the engine support fixture.
3. Raise and support the vehicle.
4. Remove the air conditioning (A/C) compressor.
5. Remove the engine-to-transaxle brace bolts (1, 2).
6. Remove the engine-to-transaxle brace (3).
7. Remove the starter.
8. If equipped with all wheel drive (AWD), remove the transfer case.
9. If equipped with front wheel drive (FWD), remove the intermediate shaft.
10. Drain the engine oil and remove the oil filter.
11. Remove the oil pan side bolts.
12. Remove the oil pan sealing surface bolts.
13. Remove the oil pan.
14. Clean the oil pan and the engine block gasket surface.
Installation Procedure
