Equinox FWD V6-3.4L (2007)
4. Install a new gasket (2) and attach the catalytic converter (4) to the exhaust manifold.
5. Install the catalytic converter to the exhaust manifold nuts (3).
Tighten the nuts to 37 N.m (27 lb ft).
6. Install a new exhaust pipe flange gasket to the catalytic converter flange.
7. Install the exhaust pipe to the catalytic converter pipe. with the catalytic converter nuts.
8. Install the exhaust pipe to the catalytic converter pipe .
Tighten the nuts to 37 N.m (27 lb ft).
9. Connect the HO2S connector (2) to the wiring harness (3).
10. Lower the vehicle.