Equinox FWD V6-3.4L (2007)
7. Install the thermal bypass hose (1) to the thermal bypass fitting.
8. Position the thermal bypass pipe hose clamp (2) over the thermal bypass fitting.
9. Fill the cooling system.
Thermal Bypass Hose Replacement
Thermal Bypass Hose Replacement
Removal Procedure
1. Drain the cooling system.
2. Release and slide the thermal bypass pipe hose clamps (2) away from the hose connections.
3. Remove thermal bypass hose (1).
Installation Procedure
1. Apply engine coolant to the bypass hose in order to ease installation.
