chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Procedures|Page 3295 > < Procedures|Page 3293
Page 7
background image

Some run flat tires, such as the Goodyear Extended Mobility Tire (EMT) used on the Corvette, may require more than 275 kPa (40 psi) to seat the
bead. In such a case, a tire safety cage must be used. Consult the tire manufacturer for its individual repair policy.

Final Inspection

1. After remounting and inflating the tire, check both beads, the repair and the valve with a water and soap solution in order to detect leaks.
2. If the tire continues to lose air, the tire must be demounted and reinspected.
3. Balance the tire and wheel assembly. Refer to Tire and Wheel Assembly Balancing - Off Vehicle.

Tire Rotation

Tire Rotation

Rotate the tires and wheels at frequent intervals to equalize wear. Refer to Maintenance Schedule (North American Emissions). In addition to scheduled
rotation, rotate the tire and wheel whenever uneven tire wear is noticed.

Procedures|Page 3295 > < Procedures|Page 3293