Equinox FWD V6-3.4L (2007)
3. NOTE: Refer to Fastener Notice.
Install the EVAP canister-to-underbody nuts (3).
Tighten the nuts to 9 N.m (80 lb in).
4. Connect the EVAP canister purge hose/pipe (1) to the EVAP canister (4).
5. Connect the EVAP canister vent hose/pipe (3) to the EVAP canister.
6. Connect the EVAP canister fresh air hose/pipe to the fuel tank fresh air hose/pipe (2).
7. Lower the vehicle.