Equinox FWD V6-3.4L (2007)
Notice: Refer to Fastener Notice .
1. If the injector sight shield studs were removed, install the studs to the intake manifold.
Tighten the studs to 10 N.m (89 lb in).
2. Install the injector sight shield to the studs.
Fuel Injector Replacement
FUEL INJECTOR REPLACEMENT
REMOVAL PROCEDURE
NOTE: Use care in removing the fuel injectors in order to prevent damage to the fuel injector electrical connector pins or the fuel injector nozzles.
Do not immerse the fuel injector in any type of cleaner. The fuel injector is an electrical component and may be damaged by this cleaning method.
IMPORTANT: If the fuel injectors are found to be leaking, the engine oil may be contaminated with fuel.
1. Remove the fuel rail.
