Equinox FWD V6-3.4L (2007)
Steering Gear: Service and Repair
Power Steering Gear Replacement
Tools Required
J 24319-B Steering Linkage and Tie Rod Puller
Removal Procedure
Notice: Secure the steering wheel utilizing a strap to prevent rotation. Locking of the steering column will prevent damage and a possible
malfunction of the SIR system. The steering wheel must be secured in position before disconnecting the following components:
* The steering column
* The intermediate shaft
* The steering gear
After disconnecting these components, do not move the front tires and wheels. Failure to follow these procedures may cause improper alignment of some
components during installation and result in possible damage to the SIR coil.
Raise and support the vehicle. Refer to Vehicle Lifting.
1. Remove the front tires.
2. Remove both outer tie rod to steering knuckle nuts. Discard the nuts.
