Equinox FWD V6-3.4L (2007)
Notice: Do not free the ball stud by using a pickle fork or a wedge-type tool. Damage to the seal or bushing may result.
Important: Hold the ball stud to prevent turning during removal of the nut.
3. Using the J 24319-B, separate the tie rods from the steering knuckles.
4. Rotate the intermediate steering shaft in order to gain access to the intermediate shaft pinch bolt.
5. Remove the intermediate to steering gear pinch bolt. Discard the bolt.
6. Disconnect the intermediate shaft from the steering gear.
