Equinox FWD V6-3.4L (2007)
Front Steering Knuckle: Service and Repair
Front Suspension
Steering Knuckle Replacement
Tools Required
J-42188-B Ball Joint Separator
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the wheel bearing/hub assembly.
Important: Do not allow the stabilizer link ball stud to rotate while removing the link nut.
4. Remove the nut and separate the stabilizer link from the strut assembly.
5. Loosen the steering knuckle to strut bolts and nuts.