Equinox FWD V6-3.4L (2007)
2. Depress the shift control cable retainer clip tabs and remove the shift control cable (2) from the shift control cable bracket (1).
3. Note the shift control cable routing and remove the shift control cable from the vehicle.
Cable Installation - Transaxle End
Refer to the following steps to install the transaxle end (1) of the shift control cable.
Important: Ensure the shift control cable is routed exactly as originally positioned in the vehicle to avoid coming into contact with
potential hazards such as hot, sharp, and moving objects.
1. Install the shift control cable (2) to the shift control cable bracket (1). Ensure the shift control cable retaining tabs fully engage the shift control
cable bracket.
2. Connect the shift control cable (2) to the transaxle range switch lever (3).
Cable Installation - Shift Control End
