Equinox FWD V6-3.4L (2007)
Drive/Propeller Shaft: Service and Repair
Propeller Shaft Replacement
Removal Procedure
1. Place a support under the propeller shaft at the rear drive module.
2. Place the transmission in neutral.
3. Raise and support the vehicle. Refer to Vehicle Lifting.
4. Index mark the relationship of the propeller shaft to the rear drive module flange.
5. Remove the bolts securing the propeller shaft yoke flange to the rear drive module flange.
6. Index mark the relationship of the propeller shaft to the power take-off unit (PTU) flange.
7. Place a support under the propeller shaft at the PTU.
8. Remove the bolts securing the propeller shaft to the PTU flange.
