Equinox FWD V6-3.4L VIN F (2005)
Hood Latch Release Cable: Service and Repair
Hood Latch Release Cable Replacement
Removal Procedure
1. Open the hood.
2. Remove the hood latch. Refer to Hood Latch Replacement (See: Hood Latch/Service and Repair) .
3. Remove the release cable from the structure. Note the routing of the hood cable in the engine compartment for installation.
4. Inside the vehicle, remove the left front carpet retainer. Refer to Carpet Retainer Replacement - Front (See: Interior Moulding /
Trim/Carpet/Service and Repair/Removal and Replacement/Carpet Retainer Replacement - Front) in Interior Trim.
5. Reposition the carpet aside to expose release handle.
