chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Campaign - Liftgate Strut Bracket Deformation|Page 10347 > < Campaign - Liftgate Strut Bracket Deformation|Page 10345
Page 1
background image

Trunk / Liftgate Shock / Support: Service and Repair

Strut Replacement - Liftgate

Removal Procedure

Caution:  When a lift gate hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or
personal injury.

1. Open and support the liftgate.

Important:  Spring clips should not be removed from the struts.

2. Lift up and partially remove the spring clips on the strut using a small flat-bladed tool.

3. Remove the upper end of the strut from the ball joint. 

Campaign - Liftgate Strut Bracket Deformation|Page 10347 > < Campaign - Liftgate Strut Bracket Deformation|Page 10345