Equinox FWD V6-3.4L VIN F (2005)
Remove the panel and drill 8 mm (5/16 in) plug weld holes in all the marked locations on the new panel.
Apply weld-thru coating to all mating surfaces.
Position the new panel in the vehicle. Plug weld accordingly.
Clean and prepare all welding surfaces. Apply the sealers and anti-corrosion materials as necessary per the GM 4901M-D-2006 Approved Refinish
Materials online at:
Go to www.gmgoodwrench.com.
Click on GM Parts & Accessories link.
Click on GM Technical Repair Information.
Click on Paint Shop.
Refinish the inside using materials compliant to GM4901M standards.
Clean the back side of the repair and apply an epoxy undercoat per GM4901-D-2006.
Reinstall the rear harness.
Reinstall the rear carpet forward.
Reinstall the rear speakers.
Reinstall the right and left rear quarter trim.
Reinstall the right and left door sill plate.
Reinstall the rear seat.
Reinstall the rear sill plate.
Reinstall the spare tire cover and cargo net.
Reinstall the exhaust.
Reinstall the trailer hitch if equipped.
Reinstall the rear fascia.
Parts Information
Warranty Information
