Equinox FWD V6-3.4L VIN F (2005)
8. Install the CRFM mounting brackets to the radiator support.
9. Install the CRFM mounting bracket bolts to the radiator support.
^
Tighten the bolts to 8 Nm (71 inch lbs.).
10. Install the CRFM closeout panel to the condenser.
11. Install the CRFM closeout panel retainers to the condenser.
12. Clip the transmission cooler lines to the fan assembly.
13. Clip the engine wire harness to fan assembly.
14. Notice: Refer to Compressor Hose Clearance to the Exhaust Gas Recirculation (EGR) Pipe Notice in Service Precautions.
Install the electrical connectors to the fan motors.
15. Install the front fascia.
16. Fill the cooling system.
