Equinox FWD V6-3.4L VIN F (2005)
5. Remove the evaporator outlet hose and liquid line from the TXV.
6. Remove evaporator outlet hose from the vehicle.
7. Remove and discard the sealing washers from the evaporator outlet hose and the compressor hose.
8. Install protective caps to the TXV and the compressor hose to prevent contamination and desiccant saturation.
INSTALLATION PROCEDURE
1. Remove the protective caps from the TXV and the compressor hose.
2. Install new sealing washers to the evaporator outlet hose, liquid line, and the compressor hose.
3. Install the evaporator outlet hose and the liquid line to the TXV.
