Equinox FWD V6-3.4L VIN F (2005)
1. Apply GM T-IV automatic transaxle fluid GM P/N 88900925 to the new output speed sensor O-ring (1).
2. Install the new output speed sensor O-ring (1) onto the output speed sensor (2).
3. Install the output speed sensor (2) into the transmission case assembly.
4. Notice: Refer to Fastener Notice in Service Precautions.
Install the output speed sensor bolt (3).
^
Tighten the bolt to 6 Nm (53 inch lbs.).
5. Connect the wiring harness (2) to the output shaft speed sensor.
