Equinox FWD V6-3.4L VIN F (2005)
Front Door Window Regulator: Service and Repair
Front Side Door Window Regulator Motor Replacement
Window Regulator Motor Replacement - Front Door
Removal Procedure
1. Remove the front door trim panel. Refer to Trim Panel Replacement - Side Front Door (See: Body and Frame/Doors, Hood and
Trunk/Doors/Front Door/Front Door Panel/Service and Repair) .
2. Remove the water deflector. Refer to Water Deflector Replacement - Front Door See: Body and Frame/Doors, Hood and Trunk/Doors/Front
Door/Front Door Panel/Service and Repair.
3. Disconnect the electrical connector from the front door window regulator motor.
4. Remove the window from the regulator.
1. Raise the window.
2. Tape the window into position.
5. Remove the front door window regulator motor screws.
Installation Procedure