Express 1/2 Ton Van V6-4.3L VIN W (1999)
5. Remove the front brake caliper retaining bolt from the front brake hose.
6. Remove the front brake hose gaskets.
7. Remove the front brake hose from the vehicle.
INSTALLATION PROCEDURE
1. Install new gaskets to the front brake hose.
2. Install the front brake hose to the vehicle.
NOTICE: Refer to Fastener Notice in Service Precautions.
3. Install the retaining bolt of the front brake hose to the front brake caliper.
^
Tighten the retaining bolt of the front brake hose to the front brake caliper to 50 Nm (37 ft. lbs.).
4. Install the retaining bolt and bracket of the front brake hose to the upper control arm.
^
Tighten the retaining bolt of the front brake hose bracket to the upper control arm to 20 Nm (15 ft. lbs.).
