Express 1/2 Ton Van V6-4.3L VIN W (1999)
IMPORTANT: If you must remove more than one tube adapter at one time, stamp the BPMV with a number (1, 2 or 3) in order to indicate the
number of grooves cut into the tube adapters. This procedure will aid proper reassembly.
1. Raise the vehicle and properly support.
2. Remove the three Electro-Hydraulic Control Unit (EHCU) shield bolts and shield.
3. Remove the appropriate brake line from the tube adapter.
4. Remove the tube adapter (1).
INSTALLATION PROCEDURE
NOTICE: Refer to Fastener Notice in Service Precautions.
