Express 1/2 Ton Van V6-4.3L VIN W (1999)
3. Connect the rear brake shoes to the backing plate.
4. Connect the front parking brake cable to the rear parking brake cables.
5. Remove the pin (1) from the parking brake lever.
6. Place the parking brake lever to the FULL up position.
7. Measure the threads of the equalizer. Adjust the threads to the following specifications:
^
Passenger/Cargo to 13 mm (0.511 inch)
^
Cutaway/Upfitters to 21 mm (0.826 inch)
8. Verify that the vehicle will hold the position with the brake lever depressed.
9. If additional adjustments need to be made, refer to Park Brake Cable Service/Adjustment.