Express 1/2 Ton Van V6-4.3L VIN W (1999)
Hydraulic Brake Booster: Service and Repair
Alarm Module Replacement
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Remove the retainers from the alarm or module.
3. Disconnect the electrical connectors.
4. Remove the alarm or module from the vehicle.
INSTALLATION PROCEDURE
1. Install the alarm or module to the vehicle.
2. Connect the electrical connectors.
3. Install the retainers to the alarm or module.
4. Connect the negative battery cable.
